LogIn LogOut

Stena Drilling Rig Gets an Engine Overhaul

October 29, 2018

Stena Drilling platform Stena Don (Photo: Royston)
Stena Drilling platform Stena Don (Photo: Royston)

The first phase of a new diesel engine maintenance and service program has been completed for vessels owned by international drilling contractors Stena Drilling, power specialist Royston said.

Work on the Wartsila 16v25 No.3 generator on board the Class 3 semi-submersible drilling platform Stena Don saw cylinder heads, pistons and conrods overhauled, as part of an extensive 20,000 running hour service.

This required a four-man engineering team working day and night shifts on the vessel while it was located at Scapa Flow, Orkney.

The work will be followed by further work on other diesel power units on board the Stena Spey rig, and the 58,000 GWT Stena IceMAX and Stena Carron drill ships.

The engine was dismantled to allow engineers to carry out maintenance and repair work on the 16-cylinder heads. New rings, bearing shells and bottom end bolts were also fitted to the pistons and conrods before they were recalibrated.

Other repair work involved refitting main bearings and replacing thrust bearings, while the air cooler, oil cooler and fuel pumps and pipes were either replaced or refurbished with new components.

Following the service, testing was undertaken which involved incremental load increases in-line with the engine manufacturer’s specification.

The Stena Don work comes ahead of a major three month-long refit of the rig, which starts in October at Damen Shipyards Verolme yard in Rotterdam. It will then be deployed to carry out drilling activities for Total E&P UK on an exploration well west of the Shetland Islands.

Alex Reilly, Royston’s marine service manager on the contract, said, “Our experience with the engine type, coupled with our ability to work on location, ensured the work was completed effectively and in good time.

“Stena was extremely happy with our engineers’ technical capabilities and professionalism. We look forward to strengthening our relationship with Stena in the coming months, as we complete the other three projects.”

The Stena Don is a dynamically positioned Class 3 semi-submersible drilling, completion and workover vessel capable of undertaking drilling operations to depths of more than 8,000 meters in the harshest environments. Its part of a seven-strong Stena Drilling fleet, which consists of four deep-water drill ships and three semi-submersible rigs.



Current News

Oil Holds near $32 ahead of OPEC-Led Talks on Output Cuts

Oil Holds near $32 ahead of OPEC-Led Talks on Output Cuts

What Do You Do When You Drop a BOP?

What Do You Do When You Drop a BOP?

Pertamina Buys NWS Condensate at 'Deep Discount'

Pertamina Buys NWS Condensate at 'Deep Discount'

KrisEnergy Sells Indonesia Block to BP

KrisEnergy Sells Indonesia Block to BP

CNOOC to Trim 2020 Spending by Up To 15%

CNOOC to Trim 2020 Spending by Up To 15%

Iran's South Pars Field Tops 700 MCM/Day Output

Iran's South Pars Field Tops 700 MCM/Day Output

Chinese Refiners Buy Rare North Sea, Guyana Crude at Low Prices

Chinese Refiners Buy Rare North Sea, Guyana Crude at Low Prices

Subscribe for AOG Digital E‑News

AOG Digital E-News is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

https://accounts.newwavemedia.com