Carnarvon Spuds Buffalo-10 Well

Friday, December 31, 2021

Carnarvon Energy announced drilling has commenced at the Buffalo-10 well in the Timor Sea as the Australian oil and gas company aims to confirm sufficient hydrocarbons to support an economic development at the shut in Buffalo field north of Australia.

The company said on Friday that the Valaris JU-107 jack-up rig has drilled the top hole section down to around 120 meters following a slight delay caused by a tropical weather system. The current operation involves the installation and cementing of the conductor.

Once the surface casing has been cemented in place, the rig will drill 17 ½” hole to a planned section depth of approximately 800 meters measured depth (MD), followed by setting the 13 ⅜” casing. Following this, the well is planned to drill the 12 ¼” hole section to approximately 2,800 meters MD before setting the 9 ⅝” casing.

No hydrocarbons are anticipated to be intersected in these drilling sections, Carnarvon said.

The Buffalo oil field resides in 30 meters of water with a reservoir depth between 3,200 and 3,300 meters below the seabed. The previous field proved the existence of a very high deliverability reservoir containing high quality light oil that Carnarvon expects would sell at a premium to Brent in today’s market.

The Buffalo-10 well will penetrate the existing oil column (because the field was still producing when it was shut-in in 2004) to assess the extent of the revised mapped attic oil column as illustrated in the schematic diagram below:

(Image: Carnarvon Energy)Carnarvon’s mid case recoverable volume estimate is 31 million barrels (gross, 2C contingent resource). With the minimum economic field size estimated to be significantly lower than the mid case estimate, there is a strong likelihood the Buffalo-10 well will confirm an economic project. Accordingly, Carnarvon’s drilling plans provide for the Buffalo-10 well to be retained as the first production well in the redevelopment program.

Carnarvon said it is working with project partner Advance Energy on plans to compress the timeline to first production once the Buffalo-10 well confirms a commercial oil resource. These plans include engaging with local industry for the supply and installation of suitable equipment to produce the oil.

Categories: Drilling Activity Oil Australia/NZ

Related Stories

CNOOC Puts Into Production New Oil Field in South China Sea

VARD Snags $125M Shipbuilding Deal for Subsea Construction Vessel

Woodside Inks Long-Term LNG Supply Deal with China Resources

Shell Hires Noble’s Drillship for Work in Southeast Asia

Sapura Energy Nets $720M from Multiple Drilling Services Contracts

Japan's Mitsui Eyes Alaska LNG Project

Santos Hires Weststar-GAP for Timor-Leste Offshore Helicopter Services

Saipem’s Castorone Vessel on Its Way to Türkiye’s Largest Gas Field

Shell Shuts Down Oil Processing Unit in Singapore Due to Suspected Leak

Flare Gas Recovery Meets the Future

Current News

Chuditch Gas Field Up for Summer Drilling Ops as Sunda Reshapes Ownership Structure

EnQuest Bags Two Production Sharing Contracts off Indonesia

Hanwha Drilling’s Tidal Action Drillship En Route to Petrobras’ Roncador Field

China's ENN, Zhenhua Oil Ink LNG Supply Deals with ADNOC

MODEC Wins ExxonMobil Guyana’s Hammerhead FPSO Contract

India Stretches Bids Deadline for 13 Offshore Deep-Sea Mineral Blocks

Indonesia Awards Oil and Gas Blocks to Boost Reserves

Sapura Energy Nets $22.6M in Offshore Support Vessel Contracts

CNOOC Puts Into Production New Oil Field in South China Sea

Sunda Energy Starts Environmental Consultation for Chuditch-2 Well Drilling Plans

Subscribe for AOG Digital E‑News

AOG Digital E-News is the subsea industry's largest circulation and most authoritative ENews Service, delivered to your Email three times per week

https://accounts.newwavemedia.com